Ultimate Raspberry Pi 4 Rig: M.2 SSD & ICE Tower

From the creator

Raspberry Pi 4 rig with M.2 SATA boot SSD, ICE Tower cooler, and lots of heavy brass! This video is a voyage of discovery in search of an ultimate, steampunk Pi 4 configuration. Well, something like that. In addition to a RaspberryPi 4 8GB model, parts used in the build (and possible international alternatives) are as follows: ICE Tower cooler from 52 Pi: Amazon.com: https://amzn.to/3jjGJHA Amazon.co.uk: http://www.amazon.co.uk/dp/B07V35V1CH/ref=nosimtag=explainin-21 (affiliate links). M2.5 brass standoff kit: Amazon.co.uk: http://www.amazon.co.uk/dp/B0778JRXPS/ref=nosimtag=explainin-21 Very close alternative on Amazon.com: https://amzn.to/39jbIPG (affiliate links). WD Green 120GB M.2 SATA SSD: Amazon.com: https://amzn.to/2OBWkEx Amazon.co.uk: http://www.amazon.co.uk/dp/B078WYRR9S/ref=nosimtag=explainin-21 (affiliate links). USB 3.0 M.2 SATA enclosure (the model I used was from ADWITS): Amazon.co.uk: http://www.amazon.co.uk/dp/B089SVKQ4M/ref=nosimtag=explainin-21 (affiliate link) There are lots of similar devices available, but note that not all USB SATA enclosures will boot on a Raspberry Pi 4. Short, angled USB extension cable -- I started out with a down-angle, but ended up using an up: Amazon.co.uk: http://www.amazon.co.uk/dp/B07BPGG9PF/ref=nosimtag=explainin-21 Amazon.com (up and down pack): https://amzn.to/3eIr9Sx (affiliate links). The 200mm x 100mm x 2mm brass plate I used was purchased from e-Bay. To boot from a USB drive, at the time of making this video th

Published 2020-07-26 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.