02:33Solving a Spitting Faucet Mystery | Ask This Old House
From the creator
Ask This Old House plumbing and heating expert Richard Trethewey diagnoses and repairs a water system with air in it. SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse Skill Level: Expert Tools List for Fixing a Spitting Faucet: Pipe cutter [https://amzn.to/2QlA1qn] Blow torch [https://amzn.to/30dqjdb] Shopping List: Ball Valve [https://amzn.to/30x7q0Z] Solder [https://amzn.to/34WE7sf] Flux [https://amzn.to/2LDXJcT] Radon test kit [https://amzn.to/2O9XFTV] Steps: 1. When dealing with water issues, start from the main water shut off and work your way back. Identify any areas where air is introduced to the system. 2. Check any potential obstructions in the water line. If there’s a filter, a pump, or anything other than a water line, check to make sure it’s working properly. 3. Water filters are naturally designed to clog, so be sure to check them often and change them regularly, as that could cause obstructions. 4. It’s also possible to put flow restrictors on the water line, which could be a simple ball valve with the handle removed, to control how much water enters and leaves various parts of the system, like a radon mitigation unit. Cut the line in the desired area and solder the valve in. Once the valve is set to the desired setting, remove the handle to prevent accidental changes to the valve. 5. If water flow is an issue, identify appliances that use an excess amount of water and consider replacing them with water conserving appliances. Resources: Ric
Published 2018-02-19 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.





