13:51Salvaged Door Shadow Box | Build It | Ask This Old House
From the creator
Ask This Old House general contractor Tom Silva and host Kevin O'Connor build a shadow box using wood recycled from an old door SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse Time: 5-6 hours Cost: $100 Skill Level: Moderate Tools List for Building a Shadow Box: Table saw Circular saw Palm sander Miter saw Glass cutter and oil Marker Spray bottle Brad nailer Strap clamp Shopping List: Old wooden door Safety glasses Hearing protection Work gloves P95 or higher rated mask 60-80-100 grit sandpaper for palm sander Wood glue Glass Clear glue Brad nails Steps: 1. Older doors may contain lead paint. Use a test kit from a home center to verify if lead is present, and if it is, you may want to have the door stripped by a professional. 2. Cut the door down to pieces using the circular saw. Use the stiles and rails as a rough guide for where to make the cuts. 3. True up the sides of the boards using the table saw. 4. Shave off the stain using the table saw. Do two passes through the saw on both sides of each board. Since this was an old door, use a P95 or higher rated mask to protect yourself from the sawdust. Once the stain is removed, the mask can be removed. 5. Use the table saw to make a rabbet cut on the edge of one of the stiles to hold the back panel. On the other side of the same stile, make a dado cut to hold the glass. 6. Sand down the back panel of the door to use as a backer for the shadow box. 7. Fill in any holes with homemade wood filler made from
Published 2017-10-08 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.





