01:39Rough Sawn Headboard | Build It | Ask This Old House
From the creator
Ask This Old House general contractor Tom Silva and host Kevin O’Connor build a headboard using rustic barnboard. SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse Time: 3-4 hours Cost: $80 Skill Level: Moderate Tools: Paintbrush Track saw Miter Saw Drill Caulking gun Bradnailer Air compressor Shopping List: _” birch plywood 2x4” framing lumber 5/4” pine Framing screws Rough sawn boards Black paint Construction adhesive Weathered wood accelerator finish Steps: 1. Paint a large sheet of birch plywood black to hide the gaps of the rough boards. 2. Cut the plywood to rough size using the track saw. 3. Secure the plywood to the back of some 2x4”s with wood glue and framing screws to stiffen out the plywood. 4. Lay out the rough sawn boards on top of the plywood. Cut any overhanging pieces with the miter saw and reuse them in the next course, depending on their length. Be sure the joints of the boards do not line up. 5. Secure the boards to the plywood using construction adhesive and the bradnailer. 6. Once the boards are secure, use the track saw to make a clean cut on both ends of the plywood. 7. Determine the width of the headboard. Tom suggests using the bed frame as a template. Center that on the plywood, and then divide the overhang on each side in half. 8. Using the track saw, make two opposing miter cuts on each side of the bed frame. Start with the outside cut so you have somewhere to rest the track on. 9. Use the construction adhesive and the br
Published 2018-10-27 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.





