tubeshowcase●1,672,743 videos♡ My collection 0
← DIY & Crafts

DIY & Crafts10:06

Reclaimed Heart Pine Bench | Build It | Ask This Old House

This Old House ↗

From the creator

Ask This Old House general contractor Tom Silva and host Kevin O’Connor create a wooden bench out of reclaimed heart pine. SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse Tom and Kevin use reclaimed pine heart wood to create a bench with a historic theme in Build It. Tools: Grinder/sander Table Saw Miter Saw Router Hand saw Plywood (for template) Scrap wood (for template) Chisel Hammer Jig saw Hole saw Rubber mallet Shopping List: Two 8-foot, 2x12 pieces of reclaimed heart pine Wood oil Steps: 1. Use a grinder with 50-grit sand paper to take off dirt. Then go over it again with 220-grit sand paper. 2. Cut rough lengths for boards with a miter saw. 3. Rip cut legs to cut off _-inch on both sides using a table saw. 4. Make a jig to cut the tenon for the using plywood and scrap lumber. Place the leg flush with the plywood and attach two “stops” on each side of the plywood. Then move it up above the end of the plywood by 1 7/8-inch and drill in another stop on the third side. 5. Using a straight-cutting bit in a router, flip the jig over and ride the router along the edge cutting to a depth of _-inch. 6. Flip the leg and make the same cut with the router on the opposite side. 7. To finish up the tenon, take _-inch off both sides using a hand saw. 8. Make the cut, then knock the pieces out with a chisel and a hammer. 9. To make the mortise, you’ll have to make another jig by measuring your tenon. Then add the the dimension of the templating guide mi

Published 2016-11-14 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.

Keep exploring DIY & Crafts