Raspberry Pi 4 Cooling

From the creator

Raspberry Pi 4B cooling solutions and sysbench stress tests, including running the Pi 4 in its official case, in a Pimoroni Coupe case with a heat sink, and with a 40mm Noctua fan in a custom, 3D printed mount. My “Online 3D printing” video (in which I show how I created the 3D printed parts used in this video) is here: https://www.youtube.com/watch?v=NzTsDrepf64 The USB host controller firmware upgrade that will reduce the temperature of a Pi 4 by a few degrees can be accessed via: https://www.raspberrypi.org/forums/viewtopic.php?f=28&t=243500&p=1490467#p1490467 The Pi 4 Pibow Coupe 4 case is here: https://shop.pimoroni.com/products/pibow-coupe-4 And the Pimoronic 40x30x5mm heat sink is here: https://shop.pimoroni.com/products/raspberry-pi-4-heatsink The Noctua NF-A4x20, 40x20mm 5V fan can be found on Amazon.com here https://amzn.to/2l6A0Y6 -- and on Amazon.co.uk here: https://www.amazon.co.uk/dp/B071W6JZV8/ref=nosim?tag=explainin-21 (affiliate links). Potential M.2 SSD heat sinks can be found on Amazon.com here https://amzn.to/2xJ6CKq -- and on Amazon.co.uk here: https://www.amazon.co.uk/dp/B07KXSK13F/ref=nosim?tag=explainin-21 (affiliate links). But do shop around for the best alternatives. You will need a hacksaw to cut these to size. The STL files for my 3D printable mount can be found on Thingiverse here: https://www.thingiverse.com/thing:3743755/files You can also access also alter the CAD on Tinkercad – the top is here: https://www.tinkercad.com/things/5oV12P

Published 2019-07-21 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.