01:54Milk Stool | Build It | Ask This Old House
From the creator
In this video, general contractor Tom Silva shows how to take reclaimed lumber and turn it into a charming milk stool for children or decor. SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse. General contractor Tom Silva and host Kevin O’Connor meet back at the shop for a unique project. Tom has some reclaimed lumber on hand that he plans to turn into a milking stool. Difficulty: ⅗ Cost: Under $100 (provided you own the tools) Time: One day How to Build a Milk Stool Note: This project requires two slabs of wood, approximately 20 by 24 by around 3 inches thick, whether reclaimed chunks or pieces of construction lumber glued together. It's possible to cut old beams into slabs and glue them together or purchase whole pieces of wood made from hemlock, pine, or other species from lumberyards. Note: Whenever removing parts from the lockset or the door, place them in a small container. These parts can be easy to lose and expensive to replace. 1. Pass the slabs of wood through the planer until the surface is flat. If a slab wobbles, hold it against the table's surface and glue a straight piece of wood to one edge until the board is stable, and then pass it through the planer. This will result in a perfectly flat, even edge. Turn the slabs over and pass them through the planer until they reach the desired thickness (about 2 inches). 2. Create a jig from a strip of thin plywood. Drill a hole to the same diameter as the router's template collar, measure exactly 6-inch
Published 2022-05-29 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.





