tubeshowcase●1,669,243 videos♡ My collection 0
← DIY & Crafts

DIY & Crafts08:48

MDF Storage Bench | Build It | Ask This Old House

This Old House ↗

From the creator

Ask This Old House general contractor Tom Silva and host Kevin O’Connor build a modern storage bench out of a single sheet of MDF SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse Time: 3-4 hours Cost: $40 Skill Level: Moderate Tools List for Building a Storage Bench: Hearing protection Track saw Router Framing square Drill driver Palm sander Safety glasses Miter saw Brad nailer Shopping List: Sheet of MDF Cushion for bench Baskets for bench Sandpaper Mask Wood glue Wood screws Steps: 1. Start by cutting the MDF sheet into a workable size with a track saw. 2. Before cutting the sheet in half for the top and bottom pieces of the bench, determine where the slots for the cubbies are going to go and mark them with a pencil and a straight edge. Use the baskets to help determine the size of the cubbies. 3. Use a router to make a dado cut along the marked lines. 4. Cut the MDF and half across the dado cut lines for the top and bottom pieces of the bench using the track saw. 5. Cut a few inches off the bottom piece of the bench. The top will have a slight overhang. 6. Cut the edges off each end of the dado cuts for the bottom piece so that they become rabbet cuts. 7. Pre-drill holes in the dados so that it’s easier to fasten everything at the end. 8. Using more of the MDF, cut the pieces for the sides, divider, and back of the bench to desired length and width. The track saw can be used for this, but a table saw is a little easier if you have one. 9. Before assemb

Published 2018-11-12 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.

Keep exploring DIY & Crafts