tubeshowcase●1,672,197 videos♡ My collection 0
← DIY & Crafts

DIY & Crafts26:05

Making a Table Saw Extension and Cross Cut Sled | I Like To Make Stuff

I Like To Make Stuff ↗

From the creator

We made a cross cut sled for your table saw with an extra storage cabinet that extends your table saw surface! Check out the plans! GET THESE PLANS! https://shop.iliketomakestuff.com/shop/product/lumber-storage-digital-plans/ TOOLS & SUPPLIES WE USED (affiliate links): https://kit.co/iliketomakestuff/table-saw-extension-cross-cut-sled https://kit.co/iliketomakestuff/my-woodworking-tools https://kit.co/iliketomakestuff/shop-safety-gear MUSIC: http://share.epidemicsound.com/iltms Many people have asked me about the cross cut sled that I use in the videos. I made it long time ago and never showed it was done. If you aren't familiar, a cross cut sled is a squared jig that wood can ride on that will result in a perfectly 90 degree cut on the table saw. I used a lot of laminated plywood pieces pocket-holed together to make a front and back fence. These fences were attached to a plywood bottom panel. To ensure that it consistently runs straight along the saw blade, you attach thin strips of wood to the underside that ride in the table saw's miter slots. That is basically it, a sled made of flat wood that runs in the miter slots, except that it isn't perfectly straight yet. To square up the back fence for consistent cuts, you use the "5-cut method." My cross cut sled was as close as I cared to get it, but be as exact as you like. Once the sled was square, I added some paste wax to the underside so it slid smoothly across the saw. The idea behind this cabinet is that it would be

Published 2019-03-28 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.

Keep exploring DIY & Crafts