35:15Making a Gimbal Handle with a Water Jet | I Like To Make Stuff
From the creator
We needed an additional handle for our camera gimbal. Instead of buying one, I made one using our new Wazer desktop waterjet machine. To find out more about the WAZER, go to https://www.wazer.com/?utm_source=iliketomakestuff BRAZING METAL BITS VIDEO https://www.youtube.com/watch?v=hSTQNWdvPmA TOOLS & SUPPLIES (affiliate links): Zhiyun Crane 2 Gimbal: https://www.amazon.com/dp/B07F3YK1BG?tag=ilik-20 https://kit.co/iliketomakestuff/my-woodworking-tools https://kit.co/iliketomakestuff/shop-safety-gear MUSIC: http://share.epidemicsound.com/iltms For shooting smooth panning shots, we use a device called a gimbal. It uses force feedback to keep our camera level and stable while it's being moved around. But one drawback of our model is that you can't comfortably carry the camera/gimbal setup in a low-slung, horizontal configuration. We decided that the solution to this is to add a rigid handle that could firmly attach to the gimbal neck, separate from the spinning head. I began by measuring the space right beneath the spinning section. The idea was to make a bracket of thick aluminum that would clamp around the gimbal neck and support a 90-degree handle far enough away so it doesn't interfere with the camera movement. Now that I had all the necessary dimensions, I whipped up a 3d model in Fusion 360. Instead of 3d printing this piece or cutting the aluminum with my traditional woodworking tools, I'm going to use a new tool, a waterjet cutter. A watejet cutter works by shooting
Published 2019-04-18 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.





