tubeshowcase●1,671,018 videos♡ My collection 0
← DIY & Crafts

DIY & Crafts09:18

Live Edge Slab Table | Build It | Ask This Old House

This Old House ↗

From the creator

Ask This Old House general contractor Tom Silva and host Kevin O’Connor build a console table using a maple slab with a live edge on it. SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse Time: 2 days Cost: $300 Skill Level: Moderate Tools List for Building a Live Edge Slab Table: Track saw Hammer Chisel Grinder Palm sander Clamps Router Drill Shopping List: Live edge slab Hairpin legs 80-120 grit sandpaper 320 grit sandpaper Wood glue Scrap wood to use for rails and jig Wood screws Cheap paintbrush Rags Amber shellac Tung Oil Steps: 1. Before doing any work, determine the orientation of the table. Decide whether the live edge should face up or face down, see which face of the slab will look nicest on top, etc. For decorative tables, Tom likes having the live edge face up so it can be really celebrated. For more functional tables, like a dining room table, Tom likes the live edge down so there’s no gap between the flat surface of the table and the person sitting at the table. Mark the sides in the middle that will need to be cut. 2. Lay the slabs on a workbench with the sides you plan to cut facing the outside of the table. Cut straight edges on both sides of each slab with the track saw. 3. Put the slabs back in the correct orientation to check the size. 4. Remove the bark from the live edge using a hammer and chisel. 5. Once the bark is off, smooth out the edges with a grinder. 6. Sand the live edges with the palm sander. Do a few passes, starting with t

Published 2018-06-03 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.

Keep exploring DIY & Crafts