16:30I Bought A Honda S2000 And It's Amazing!
From the creator
2002 Honda S2000 (AP1) Engineering Review! Subscribe for new videos every Wednesday! - https://goo.gl/VZstk7 VTEC Just Kicked In! The S200) features a 2 liter, inline four cylinder with dual overhead cams and the ever-popular VTEC. It produces 240 HP at 8,300 RPM, and 153 lb-ft of torque at 7500 RPM. The engine screams all the way to 9,000 RPM, and had the highest specific output of any naturally aspirated production vehicle on the market when it was released, only to be dethroned by the Ferrari 458 about 10 years later, when they too decided 9,000 RPM was a cool idea. The S2000 incorporates carbon fiber into the cylinder bore liner. Essentially the aluminum alloy is poured over cylinder cores which are made up of aluminum and carbon fibers, and these fibers absorb the molten aluminum. Then the cylinders are bored out, removing most of this material, but leaving a composite cylinder wall about half a millimeter thick. This remaining layer is reinforced with carbon and aluminum fibers, however it’s still integral with the rest of the block. Honda claims this gives it additional strength, and allows for using larger bores within the same size external engine block. The same technology is used in the 3.2L Acura NSX. Keeping strength in mind, the S2000’s pistons are made of forged aluminum, a first for Honda. The transmission had to be designed as compact as possible since the engine is pushed so far back. To do this, Honda kept all six close-ratio speeds and reverse on two p
Published 2016-09-04 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.
Keep exploring Engineering
16:30
01:49
01:54
01:37
02:11
01:49Pharmaceutical Machinery & Spares by Bhavani Engineering Works, Ahmedabad
IndiaMART InterMESH Ltd
09:27Lloyds Engineering Works Limited share LATEST News today | Lloyds Steel Industry latest news today
The Share Shiksha