01:54How to Wirelessly Connect Multiple Light Switches | Ask This Old House
From the creator
Ask This Old House master electrician Heath Eastman helps a homeowner connect four separate switches that control six lights in the same room #ThisOldHouse #AskTOH SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse Time: 1 hour Cost: $120 and up Skill Level: Beginner Tools: Flathead screwdriver [https://amzn.to/2YB02Ep] Phillips head screwdriver [https://amzn.to/2L5dQiF] Shopping List: Wired smart switch [https://amzn.to/3c7Palf] Wireless switch [https://amzn.to/2SBuef2] Wireless switch cover plate [https://amzn.to/35wEUki] Wire nuts [https://amzn.to/3dkon5u] Steps for connecting multiple wireless light switches: 1. Start by shutting off the power at the main breaker. 2. Remove the switch cover and remove the old switch. Both the cover and the wires can be loosened with a screwdriver. 3. Connect the hot, neutral, and ground wires on the smart switch with the wires in the wall using some wire nuts. 4. Push the switch back into the wall and secure the cover plate over it with the screwdriver. 5. Determine the location for the wireless switch. The switch comes with a wall mounting bracket that can be screwed into the wall. The wireless switch then snaps into the bracket. 6. Program the wireless switch to pair with wired smart switch following the manufacturer’s instructions. Resources: Heath installed the Caseta by Lutron Smart Kit [https://amzn.to/3fkDw8J]. This included three In-Wall Smart Dimmer Switches to replace the old switches, two Pico Smart
Published 2020-05-10 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.





