tubeshowcase●1,674,329 videos♡ My collection 0
← DIY & Crafts

DIY & Crafts07:48

How to Wire for a New Ceiling Light | All About Lights | Ask This Old House

This Old House ↗

From the creator

Ask This Old House electrician Scott Caron installs a new switch and ceiling fixture for a homeowner. #ThisOldHouse #AskTOH SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse Time: 2 hours Cost: $100 Skill Level: Expert Tools List for Wiring a New Ceiling Light: Oscillating saw Pliers Drill Shopping List: LED light fixture Electrical mounting box Electrical single gang box Electrical wire Wire nuts Electric staples Fish tape Electrical tape Madison bars Light switch Light switch cover Steps: 1. Before doing any electrical work, always shut off power to the house at the main breaker. 2. Trace the mounting box on the ceiling where the light fixture will be mounted. 3. Cut out the traced hole with an oscillating saw. 4. Determine a location for the light switch. It should be 48” from the floor. 5. Trace the electrical box for the switch and cut it out the same way as the mounting box. 6. Locate a source of power for the switch, either at a junction box or at the main electrical panel. 7. Connect the electrical wire to your source of power using the pliers and wire nuts and fish it through the joists until it reaches the light switch. Secure the wire to the joists with electric staples. 8. Drill through the floor in the correct stud bay and send the wires for the switch and the light up to the switch using the fish tape. 9. Mount the electrical box with Madison bars in the wall and wire the switch. 10. Screw the switch into the box and then cover it with the

Published 2018-04-08 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.

Keep exploring DIY & Crafts