35:15How to Whitewash Brick with Paint | Ask This Old House
From the creator
Ask This Old House painter Mauro Henrique updates a fireplace surround with a whitewashed look SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse Time: 2 hours Cost: $100 Skill Level: Moderate Tools List for Whitewashing Brick: Paint Brushes Rags Buckets Shopping List: Water Based Paint Painter’s Tape Masking Paper Drop Cloths Stir stick Latex gloves Steps: 1. Before doing any work, use painter’s tape, masking paper, and drop cloths to ensure paint only ends up on the brick. 2. Mix a flat, water-based paint with water in a bucket at a 1:1 ratio. 3. Paint the watered down paint onto the brick with a wide paint brush. Immediately follow behind with a rag to dab off some paint until the desired effect is achieved. Resources: For the fireplace, Mauro watered down a can of Ultra Spec 500 flat white primer, manufactured by Benjamin Moore (https://www.benjaminmoore.com/en-us). He didn’t touch the firebox, but if he did, he would need to use a heat resistant paint. The other materials Mauro used to paint the fireplace, including the buckets, rags, and paint brushes can all be found at home centers and paint stores. About Ask This Old House TV: Homeowners have a virtual truckload of questions for us on smaller projects, and we're ready to answer. Ask This Old House solves the steady stream of home improvement problems faced by our viewers—and we make house calls! Ask This Old House features some familiar faces from This Old House, including Kevin O'Connor, gen
Published 2019-01-07 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.





