tubeshowcase●1,673,749 videos♡ My collection 0
← DIY & Crafts

DIY & Crafts04:50

How to Upgrade to a Tamper Proof Outlet | This First House

This Old House ↗

From the creator

When our homeowner wanted more protection against electrocution risks for his children, contractor Zack Dettmore called in an electrical pro for help. SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse. Most new parents babyproof their homes with those plastic outlet plug guards to help prevent a child-involved electrical accident. However, seasoned parents will tell you that kids can pull them out just as easily as they install. The real solution is tamper-proof outlet installation, and contractor Zack Dettmore called in a pro to help our homeowner install them. 1. Shut off the breaker controlling the outlet. Return to the outlet and test it with an outlet tester to ensure it’s powered off. 2. Remove the cover plate from the outlet and then remove the screws holding the outlet to the electrical box. Pull the outlet out of the box. 3. Examine the existing wiring. You’ll have a hot wire connected to the gold screw or terminals, at least one neutral wire connected to the white screw or terminal, and possibly a ground. Take note of the colors and where they were installed. Also, if there isn’t a bare copper wire (the ground), we’ll install one. 4. Remove the wires from the existing outlet. Use a pair of diagonal cutters to cut each wire, snipping them one at a time. 5. If there isn’t a ground wire, cut a length of bare copper wire about 18 inches long. Bend a loop in the middle of the wire and then bend the loop at a 90-degree angle. Place a green ground screw

Published 2026-06-19 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.

Keep exploring DIY & Crafts