How to Upgrade a Bathroom Vanity | Ask This Old House

From the creator

Ask This Old House plumbing and heating expert Richard Trethewey installs a vanity for homeowners who gave up on it 7 years ago. SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse All the tools Richard used for the project, including wrenches, plumber’s putty, and PVC glue, can be found at home centers and plumbing supply stores. The vanity and countertop were custom-ordered by the homeowner. Cost: $500 and Up Skill Level: Moderate Tools List: Open ended adjustable wrench Utility knife Hammer Pry bar Screwdriver Pipe cutter Hacksaw Measuring tape Drill Hole saw Level Shopping List: Vanity cabinet Shut off valves Countertop Sink Silicone caulking Stain free plumber’s putty Faucet Hot and cold water lines Drain pipe Pop up drain Steps: 1. Shut the hot and cold water lines off. 2. Disconnect the sink from the P-trap and break the hose connections to the faucet. 3. Use the utility knife to break the seal between the sink and the countertop. Then, carefully pry the sink away from the countertop with a hammer and a pry bar. 4. Remove the screws holding the vanity to the wall and remove the vanity. 5. Shut the water off to the house and cut the hot and cold water lines. Cut the P-trap as well. This will make it so only small holes need to be cut in the back of the new vanity. 6. Measure the distance from the wall to the hot line and cold line. Next, measure the distance from the floor to the hot and cold lines. Transfer these measurements to the back of the van

Published 2018-02-05 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.