tubeshowcase●1,673,281 videos♡ My collection 0
← DIY & Crafts

DIY & Crafts03:00

How to Update a Flat Panel Hollow Core Door | Ask This Old House

This Old House ↗

From the creator

Ask This Old House carpenter Nathan Gilbert upgrades a standard, flat panel hollow core door to look more modern. #ThisOldHouse #AskTOH SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse Time: 4-5 hours Cost: $50-100 Skill Level: Beginner to Moderate Tools List for Updating a Flat Panel Door: [YT] Screwdriver [https://amzn.to/2FjzH2Y] or drill [https://amzn.to/39xAWcR] Tape measure [https://amzn.to/2Fj7E3y] Miter saw [https://amzn.to/2tviFfn] Brad nailer [https://amzn.to/39xFLmt] Caulking gun [https://amzn.to/2QHfHwy] Paint brush [https://amzn.to/2MTZSkT] Paint bucket [https://amzn.to/39EgTJs] Shopping List: [YT] Decorative trim [https://amzn.to/39EQqLV] New door hardware [https://amzn.to/2SWgY5H] Wood glue [https://amzn.to/39AZYaW] Brad nails [https://amzn.to/37EisFP] Wood putty [https://amzn.to/2QkVz45] Caulk [https://amzn.to/37BRgHM] Paint [https://amzn.to/2MRusf6] Steps: 1. Start by taking the door off of the hinges. 2. Remove all the hardware from the door using a screwdriver or a drill. 3. Mark the layout for the door. In general, Nathan likes to start with a 4” rail on the top, center the middle rail around the doorknob, and leave any excess on the bottom. 4. Cut all the trim to size and miter the edges. 5. Apply wood glue to the cut the trim and also along the edges of the layout on the door. Glue the trim to the door and secure it in place with the brad nails. 6. Fill in all the nail holes with wood putty and caulk around the edges of the t

Published 2020-01-06 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.

Keep exploring DIY & Crafts