tubeshowcase●1,673,666 videos♡ My collection 0
← DIY & Crafts

DIY & Crafts05:26

How to Safely Attach a Deck to a House | This Old House

This Old House ↗

From the creator

This Old House general contractor Tom Silva shows how to save a wood deck from a catastrophic collapse. SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse Tom helped a homeowner repair a deck that was in imminent danger of collapsing due to poor building practices. Underneath, Tom found that a couple of nails were the only things holding the deck's ledger board to the house. Using framing lumber and a sledgehammer, Tom pushed the deck back toward the house and back up to the proper height. With the deck in the proper position, Tom fastened the ledger board to the rim joist of the house with lag screws. For additional support, and to prevent the ledger board from splitting, Tom also used masonry bolts to fasten the ledger board to the stone foundation. He also found that the original deck builder used joist hangers that were too small for the 2x10 joists, so he installed larger-sized timber hangers (designed for engineered lumber) for additional support. Tools for How to Safely Attach a Deck to a House: - Sledgehammer - Circular saw - Drill/driver - Impact wrench - Hammer drill with 1/2-inch-diameter masonry bit Shopping list for How to Safely Attach a Deck to a House: - 2x4s and 2x6s_-inch x 10-inch galvanized lag screws with washers - _-inch x 10-inch masonry wedge anchors - Pressure-treated 2x4 - Engineered-lumber joist hangers Joist hangers, masonry bolts and lag screws can be found at your local home center or lumberyard. About This Old House TV: Thi

Published 2014-06-02 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.

Keep exploring DIY & Crafts