tubeshowcase●1,673,521 videos♡ My collection 0
← DIY & Crafts

DIY & Crafts14:00

How to Restore an Antique Door | Ask This Old House

This Old House ↗

From the creator

In this video, Ask This Old House general contractor, Tom Silva, helps two homeowners meticulously restore their original, 1918 front door using paint stripper, mahogany veneer, polyurethane finish, and a polyurethane finish. SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse. Tom Silva restores an antique door that is believed to be original to a 1918 home. The door has charm but it is fading from the sun, chipping from the original veneer over the door, and has lots of issues with the current door hardware. The homeowners wanted to sand it down and refinish on their own, but they were afraid that they would ruin the intricate detail in the moulding. Tom warns that working on doors like theirs can be a ton of work. The beading detail alone will take a long time to strip down properly. Also, making the proper adjustments to the hardware—especially if they opt to replace it—can be both expensive and time-consuming. On top of that, applying a finish also takes a while. Still, the homeowners decide to forward with the project, and they get to work. Time: 5-6 hours Cost: $400 Skill Level: Moderate Tools: Hammer [https://amzn.to/3umlY3a] Chisel [https://amzn.to/3vNdGl4] Utility knife [https://amzn.to/2R0jBod] Nail puller [https://amzn.to/3eTdSsw] Small paint brush [https://amzn.to/33j1wV4] Straight edge [https://amzn.to/3xQGpHx] Measuring tape [https://amzn.to/3uA3VXe] Roller [https://amzn.to/3hhEypJ] Sanding block [https://amzn.to/3b5at8y] Random orbital sander

Published 2021-05-09 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.

Keep exploring DIY & Crafts