35:15How to Restore a Historic Fireplace | Ask This Old House
From the creator
Ask This Old House mason Mark McCullough delicately restores a damaged, historic fireplace that is built with custom, nearly irreplaceable bricks. SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse Time: 6-8 hours Cost: $100 and up Skill Level: Expert Tools List for Restoring a Fireplace: Margin trowel [https://amzn.to/2J6KCAU] Flat jointer [https://amzn.to/2PUbkNN] Mixing bucket [https://amzn.to/2LsQ5nG] Shopping List: Masonite [https://amzn.to/2JonBZK] 2x4” boards [https://amzn.to/2WwmWJo] Type N mortar mix [https://amzn.to/2DUNLj4] Restoration sand Red dye for mortar [https://amzn.to/2LuRQkd] Steps: 1. Start by adding support to the arch of the fireplace with a piece of Masonite and a few pieces of 2x4”, cut to size. Hammer them into place until the Masonite feels fully supported. 2. Identify the bricks that have fallen out of place or settled and plan to remove only the ones that need readjustment. 3. Carefully remove the old mortar holding the bricks. High quality, older masonry jobs used significantly thinner joints, so if a chisel doesn’t fit, try a margin trowel or a flat jointer. 4. Using the back of the trowel, gently tap the brick to see if it will break the bond of the other bed joint surrounding the brick. Slide the trowel through that joint and remove the mortar there as well. 5. With all the mortar removed around the brick, carefully pull that brick out of the fireplace. 6. Repeat this process with all the bricks that have settled. 7. M
Published 2019-05-15 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.





