tubeshowcase●1,674,138 videos♡ My collection 0
← DIY & Crafts

DIY & Crafts09:49

How to Replace Pedestal Sink Parts | Ask This Old House

This Old House ↗

From the creator

Ask This Old House plumbing and heating expert Richard Trethewey helps a homeowner replace all the plumbing components in his pedestal sink. #ThisOldHouse #AskTOH SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse Time: 2-3 hours Cost: $150 Skill Level: Moderate Tools: Pliers [https://amzn.to/2REfCuI] Wrench [https://amzn.to/2xyGaqr] Utility knife [https://amzn.to/2XGMMO4] Putty knife [https://amzn.to/2VeGWSk] Hammer [https://amzn.to/3afvzOy] Basin wrench [https://amzn.to/2yYEcQq] Shopping List: Faucet [https://amzn.to/2Vdp4r9] Stainless steel braided hoses [https://amzn.to/2VzfyNZ] Plumber’s putty [https://amzn.to/3ckWXfm] Steps for Replacing Pedestal Sink Parts: 1. Start by shutting off the hot and cold water valves to the sink. Open the faucet to ensure the shutoffs hold. 2. Disconnect the hot and cold water supply lines using pliers. There will still be a little bit of water in these hoses so be prepared with a small bucket or a rag to catch the water. 3. Remove the basin of the sink from the base of the pedestal. a. The basin is usually held against the wall by two bolts, which can be loosened using a wrench. b. Richard recommends scoring along the wall with a utility knife to prevent any caulking between the sink and the wall from damaging the wall. c. To loosen the drain connection, carefully slide the pedestal away from the basin until you can get a wrench around the drain. d. Once everything is disconnected, pull the basin away. Rich

Published 2020-04-22 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.

Keep exploring DIY & Crafts