tubeshowcase●1,669,464 videos♡ My collection 0
← Engineering

Engineering06:16

How To Replace Brake Pads And Rotors (Front & Rear)

Engineering Explained ↗

From the creator

How To Install Brake Pads & Rotors On A Honda S2000 QuickJack - https://www.quickjack.com/ Subscribe for new videos every Wednesday! - https://goo.gl/VZstk7 Products Used: QuickJack - http://amzn.to/2sfGmXV (5,000 lb in video) Brake Piston Tool - http://amzn.to/2tWIFMv Silicon Paste For Brake Pins - http://amzn.to/2tWbHvG Molykote M77 - http://amzn.to/2sZgNri Aluminum Anti-Sieze - http://amzn.to/2sg4Ccj Copper Anti-Sieze - http://amzn.to/2sfTxI8 Brake Pads - http://bit.ly/2tn0WFO Front Brake Rotors - http://bit.ly/2sfprEZ Rear Brake Rotors - http://amzn.to/2sZS9Xu I’ve picked out some rotors with directional vanes, rather than straight vanes, which supposedly offer better cooling as they help pump air through the brakes, which leads to less brake fade. I’ll be doing some testing to see if this is actually true in a later video. Our first step in changing out the brakes is to loosen the wheel lug nuts. Next, we need to lift the wheels off the ground. Be sure to locate the proper jacking points in your owners manual before lifting the car. With the car raised, we can remove the wheels and access the brakes.Starting at the front, first we need to remove the brake caliper to get access to the rotor. To remove the caliper piston & brake pads, there are two bolts on the backside of the caliper. Use a wrench to hold the caliper pin in place, while using a socket wrench to remove the bolts. After removing these two bolts, you can pull the caliper free - set it aside and be sure

Published 2017-07-02 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.

Keep exploring Engineering