tubeshowcase●1,668,813 videos♡ My collection 0
← DIY & Crafts

DIY & Crafts09:29

How to Replace a Shower Cartridge | Ask This Old House

This Old House ↗

From the creator

Ask This Old House plumbing and heating expert Richard Trethewey travels to Seattle to help a homeowner whose shower runs cold whenever there’s a demand for hot water elsewhere in the house SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse Cost: $30 Skill Level: Beginner Tools List for Replacing a Shower Cartridge: Flathead screwdriver Cartridge removal tool Caulking gun Shopping List: Replacement cartridge Grease Silicone caulking Foam bead Steps: 1. These instructions apply to the earliest models of single handle shower valves. Follow manufacturer’s instructions for your specific style of valve. 2. Start by removing the handle of the shower. There’s usually a cover plate that can be pried off with a flathead screwdriver. Then, hold the handle tight and unscrew the screw behind the cover plate with the same screwdriver. 3. Remove the escutcheon plate by unscrewing it. 4. Look to see if there’s a water shut off near the shower valve. If not, shut the water off at the main water supply line. 5. There’s a small clip holding the cartridge in the shower valve. Carefully pry that up. 6. Use a cartridge removal tool to carefully work the old cartridge back and forth until it can be safely remove from the wall. The cartridge removal tool may be included with the replacement cartridge. 7. Once the cartridge is loose, use a pair of pliers to carefully pull it out of the wall. Don’t force it out. If it gets damaged while being removed, it could destroy the whole va

Published 2018-11-12 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.

Keep exploring DIY & Crafts