tubeshowcase●1,669,464 videos♡ My collection 0
← DIY & Crafts

DIY & Crafts04:57

How to Replace a Rotted Fence Post | Ask This Old House

This Old House ↗

From the creator

Repairing a decayed fence post with Ask This Old House landscape contractor Roger Cook. (See below for shopping list, tools, and steps.) SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse Replacement fence posts are available at home centers, lumber yards, and from fence installers. The E-Z Mender fence post mending plate that Roger showed in the barn is manufactured by Simpson Strong-Tie [https://www.strongtie.com/]. Shopping List for How to Replace a Rotted Fence Post: - 8-foot-tall pressure-treated fence posts - 4-foot level,"] to plumb up the fence posts - 3/4-inch stone and stone dust, for backfilling around fence posts - 2x4, to tamp down the stone - 3-inch (10d) galvanized nails, for securing the posts to the fence rails Tools List for How to Replace a Rotted Fence Post: - Reciprocating saw, to cut out the rotted post - Framing hammer, for chopping out wood between the reciprocating saw cuts - Posthole digger, to clean out and excavate old postholes - Nylon mason line, for establishing straight layout lines - Pointed shovel, to backfill the fence-post holes Steps for How to Replace a Rotted Fence Post: 1. Use a reciprocating saw to separate the rotted post from the fence. Cut through the post directly above and below each of the three horizontal fence rails. 2. To expose the fence rails, use the straight claw of a framing hammer to chop out the wood in between the reciprocating saw cuts. 3. Move to the back of the fence and extract any nails or scre

Published 2016-05-13 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.

Keep exploring DIY & Crafts