tubeshowcase●1,669,243 videos♡ My collection 0
← DIY & Crafts

DIY & Crafts06:34

How to Replace a Pedestal Sink | Ask This Old House

This Old House ↗

From the creator

Ask This Old House plumbing and heating expert Richard Trethewey helps a homeowner in Delaware replace his cracked pedestal sink. (See below for a shopping list, tools, and steps.) SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse Richard installed the Cimarron pedestal sink with 8" widespread faucet holes and the Kelston widespread bathroom sink faucet, both manufactured by Kohler [https://bit.ly/2HmgwKC]. Shopping List for How to Replace a Pedestal Sink: - Pedestal sink kit - Bath faucet - Braided hose connectors Tools for How to Replace a Pedestal Sink: - Open-end wrench - Socket set - Pliers - Caulk gun Steps for How to Replace a Pedestal Sink: 1. Turn off the water supply to the sink. 2. Use an open-end wrench to loosen the nuts on the hot/cold water connections. 3. Use pliers to break the drainage connection. 4. Loosen lag screws holding the sink onto the wall using a socket set. 5. Release the caulking attaching the sink to the wall using a utility knife. 6. Lift the sink off the pedestal and remove the pedestal. 7. On the new sink, attach the new spout by surrounding its base with plumber’s putty and inserting it into the center hole. Tighten up the connection using an open-end wrench. 8. Repeat the same steps for both the hot- and cold-water handles. 9. Attach braided hoses to handles using an open-end wrench; then do the same to attach the hoses to the spout piping. 10. Insert the pivot rod into the drainage pipe. 11. Adjust the clevis p

Published 2016-01-25 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.

Keep exploring DIY & Crafts