tubeshowcase●1,669,816 videos♡ My collection 0
← DIY & Crafts

DIY & Crafts04:47

How to Replace a Main Shutoff Valve | Ask This Old House

This Old House ↗

From the creator

Ask This Old House plumbing and heating expert Richard Trethewey shows how to replace a main shut off valve that is not closing properly SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse Time: 1 hour Cost: $25 Skill Level: Moderate Tools List for Replacing a Main Shutoff Valve: Tubing cutter Torch Fitting brush Shopping List: Ball valve Plumber’s sand paper Flux Solder Steps: 1. If the indoor shut off valve is not stopping water flow, the local water department has access to a shut off valve near the street and can be called to shut off water while work is performed. 2. With the water off, open the faucets and showers in the building to drain down any water left in the pipes. 3. Use sandpaper to clean the main water line before cutting into it. 4. Cut into the water line using a tubing cutter. When the line is broken, there may be residual water inside that needs to drain out. 5. Use the fitting brush to clean the inside of the valve. 6. Apply flux to the outside of the pipe and the inside of the valve. 7. Hold the torch to the fitting until the flux bubbles, then touch the solder to the pipe opposite the flame. If it’s the correct temperature, the solder should melt and fill in all gaps. 8. Call the water utility to turn back on the water. Resources: Ball valves and soldering tools are available at home centers. About Ask This Old House TV: Homeowners have a virtual truckload of questions for us on smaller projects, and we're ready to answer. Ask This

Published 2018-12-09 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.

Keep exploring DIY & Crafts