tubeshowcase●1,669,463 videos♡ My collection 0
← DIY & Crafts

DIY & Crafts07:21

How to Replace a Hearth with Slate Tile | Ask This Old House

This Old House ↗

From the creator

Ask This Old House mason Mark McCullough replaces a common terra cotta hearth with slate tile. SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse Time: 4-5 hours Cost: $500 and up Skill Level: Difficult Tools: Small sledgehammer [https://amzn.to/37gXyvF] Cold chisel [https://amzn.to/2UPoVKy] Tile cutter [https://amzn.to/2OMn3OZ] Notched trowel [https://amzn.to/2HfHBLC] Float [https://amzn.to/2OIFqEI] Sponge [https://amzn.to/3bxjBBx] Shopping List: Slate tile Painter’s tape [https://amzn.to/2uAFHT2] Tile spacers [https://amzn.to/2SDulFU] Thinset [https://amzn.to/2OOlgZY] Grout [https://amzn.to/2Sh5Ejy] Steps: 1. Start by protecting the edges around the hearth with a little bit of painter’s tape. 2. To remove the old tile, place the cold chisel straight down on one of the tiles. Hit the back end of the chisel with a small sledgehammer. This will cause the tile to break. Continue doing this until the full tile has been removed. 3. Once that first tile has been removed, it should be possible to slide the cold chisel underneath the rest of the tiles and pry them up. Remove the rest of the tiles using this strategy. 4. Start laying out the new tiles on the hearth. Measure the full width of the hearth and divide it in half to determine the center. Place one tile on each side of the center line and put a spacer in between them to determine the correct spacing. Use these two tiles to determine the placement for the rest of them. 5. It’s likely that some tiles on t

Published 2020-02-21 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.

Keep exploring DIY & Crafts