02:47DIY✨ Galaxy glitter🪩 bookmark!! #shorts #trending #craft #ytshorts #viral #diycrafts #craftideas
Twinnies Fun world
Ask This Old House mason Mark McCullough replaces a concrete walkway with brick pavers. Click here to SUBSCRIBE to the official This Old House YouTube channel: http://www.youtube.com/subscription_center?add_user=thisoldhouse Time: 4-5 hours Cost: $500 and up Skill Level: Moderate Tools List for Replacing a Concrete Walkway: Pickax Sledgehammer Work gloves Safety glasses Rake Tamper Trowel Rubber mallet Level Push broom Shopping List: Disposable dumpster Brick pavers Gravel Stone dust 2x4” lumber Plastic edging Steps: 1. Look for a weak point in the concrete, such as the control joints or a crack in the walkway, and try to pry up the concrete pad using the pickax as leverage. If there are no weak points, hit the pad with a sledgehammer until a crack forms. 2. With the concrete pad loose, smash it with the sledgehammer until it breaks into manageable pieces. 3. Remove the concrete pieces and dispose of them in the disposable dumpster. 4. Clean out the base of the walkway with a rake and then compact it with a hand tamper. 5. Pour a layer of gravel on top of the walkway and spread it out with the rake. 6. Compact the gravel with the hand tamper. 7. Pour a layer of stone dust on top of the gravel and spread that with the rake as well. 8. Screed the stone dust level with a scrap piece of lumber. Use a trowel and additional stone dust to fill in low spots as you screed. 9. To make the screed process easier, here’s a trick: take the lumber and notch out on each
Published 2019-01-23 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.
02:47Twinnies Fun world
01:32Daisy Arts
03:01
11:39123 GO! FOOD
10:02
03:34
01:40𝚌𝚞𝚝&𝚌𝚘𝚕𝚘𝚛 𝚋𝚢 𝚊𝚖𝚒
Allow Google Analytics to measure visits. Your history stays in your browser. Privacy details