tubeshowcase●1,670,700 videos♡ My collection 0
← DIY & Crafts

DIY & Crafts05:17

How to Replace a Clogged Shower Valve | Ask This Old House

This Old House ↗

From the creator

This Old House plumbing and heating expert Richard Trethewey replaces a clogged shower valve that would not allow hot water into the shower. SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse Richard used a Moen [https://www.moen.com/bathroom] replacement cartridge (part number 1222) for this shower. When replacing a shower valve, it is important to know the manufacturer of your valve, as parts vary by manufacturer. The valve that Richard showed in the workshop with integrated stops was a Symmons Temptrol Valve [https://bit.ly/35rl6Pt]. Shopping List for How to Replace a Clogged Shower Valve: - New shower-valve cartridge, used to replace old cartridge - Rag, used to cover tub drain - Waterproof grease, used to lubricate new valve   Tools List for How to Replace a Clogged Shower Valve: - Screwdriver - Pliers - Pocketknife, for removing the retainer clip - Plastic shield, used to prevent water from dripping behind wall Steps for How to Replace a Clogged Shower Valve: 1. Cover the tub drain with a rag to prevent any dropped parts from falling into the drain. 2. Unscrew and remove the handle and escutcheon plate from the shower valve. 3. Close the hot- and cold-water shutoff valves to the shower. 4. Use a pocketknife to carefully pry the retainer clip from the shower valve. 5. Hold a plastic shield beneath the valve to catch any water, then use pliers to pull out the old shower cartridge. 6. Smear waterproof grease onto the O-rings of a new shower-valve cartrid

Published 2015-11-07 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.

Keep exploring DIY & Crafts