tubeshowcase●1,671,249 videos♡ My collection 0
← DIY & Crafts

DIY & Crafts08:24

How to Repaint a Rusty, Metal Hand Rail | Ask This Old House

This Old House ↗

From the creator

Ask This Old House painter Mauro Henrique helps a homeowner clean up and repaint a rusty, metal railing SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse Time: 2-3 hours Cost: $100 Skill Level: Beginner Tools List for Painting a Rusty Metal Hand Rail: Metal scraper Wire brush Paint brush Paint roller Shopping List: Lead test kit Masks Safety glasses Drop cloths Scrubbing pad 150 grit sandpaper Mineral spirits Rags Oil based metal primer DTM paint Paint tray Duct tape Steps: 1. If the railings were installed in 1978 or earlier, start by testing the railings for lead paint. Follow the instructions on the lead test. a. If the railing tests positive for lead paint, start by protecting the work area with tough, plastic drop clothes. b. Wear a mask that is rated lead paint, gloves, and a protective coverall suit. Then, follow the additional steps below. 2 If the railings don’t test positive for lead, begin prepping the work area by placing drop cloths underneath the railings. This is a very messy job. 3. Using the metal scraper, scrape as much of the metal railings as possible to remove the rust and any peeling paint. 4. For non-flat surfaces that the metal scraper can’t reach, switch to a wire brush to remove the rest of the rust. 5. Once the bulk of the rust and peeling paint have been removed, clean up the surfaces with a dry scrubbing pad. 6. Lightly sand the metal railings with 150 grit sandpaper. 7. Wipe down the railings with

Published 2019-04-01 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.

Keep exploring DIY & Crafts