35:15How to Reface a Concrete Wall | Ask This Old House
From the creator
In this video, Mark McCullough and Jenn Nawada dress up a drab concrete wall with a stylish thin stone veneer. SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse. Since the wall is in good condition, veneer is a great choice to make it look much nicer at a smaller price than just replacing the whole wall. Mark and Jenn work together to prep the wall, apply the stone veneer, and lay a stone cap. Time: 5-6 hours Skill Level: Moderate Tools: Grinder [https://amzn.to/2ZtRWNg] Brush [https://amzn.to/3saYHzG] Trowels [https://amzn.to/3sdxRXA] Jointer [https://amzn.to/3ugVFM8] Mallet [https://amzn.to/3k5y9gH] Level [https://amzn.to/3qB18et] Shopping List: Stone veneer [http://bit.ly/3qB1uBP] Modified thin-set mortar [https://amzn.to/3k3P96E] Steps: 1. Clean up the wall. Grind the top down to the raw concrete to ensure good adhesion for the cap. Repeat down the wall for both sides. Do not grind down all the way flat. The low spots will help with adhesion. 2. Spray down with water and brush clean. 3. Use a notched trowel to spread modified thin-set mortar on a small section of the wall. 4. Take a margin trowel to back-butter the stone and stick onto the wall where the mortar has been placed. 5. Use chips of stone to place in between the stones. This will prevent sagging and let the stones set the way you intended. Once the stones are set you can pull them out. 6. Use a flat jointer to add the joints. 7. Spread mortar on the top. Pitch the mor
Published 2021-02-22 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.





