18:08How to Prevent Plumbing Leaks Automatically | Ask This Old House
From the creator
Ask This Old House plumbing and heating expert Richard Trethewey demonstrates a wireless detector that can shut off the water in case of a flood. SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse Cost: $1600 per kit Skill Level: Moderate Tools List for Preventing Plumbing Leaks: Pipe cutter Blow torch Shopping List: Wireless flood detector kit Variety of fittings Steps: 1. Shut off the water supply at the main shut off valve. 2. Using the pipe cutter, cut into the pipe close to the water main. 3. Install the automatic valve and connect to it using the appropriate fittings based on the style of your water supply piping. 4. Find a good place to place the receiver, close to the automatic shutoff. Connect the automatic shutoff to the receiver. 5. Program the sensors following the instructions included with the kit. Resources: Richard demonstrated the RDT Reliance Wireless Plumbing Leak Protection System (http://reliancedetection.com), which can be purchased through plumbing supply houses. Expert assistance for this segment was provided by Morris Merchants (http://www.morrismerchants.com). About Ask This Old House TV: Homeowners have a virtual truckload of questions for us on smaller projects, and we're ready to answer. Ask This Old House solves the steady stream of home improvement problems faced by our viewers—and we make house calls! Ask This Old House features some familiar faces from This Old House, including Kevin O'Connor, general contractor Tom Silva
Published 2017-10-23 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.





