tubeshowcase●1,670,763 videos♡ My collection 0
← DIY & Crafts

DIY & Crafts06:43

How to Patch a Hole in a Brick Wall | Ask This Old House

This Old House ↗

From the creator

Ask This Old House mason Mark McCullough travels to Denver to patch a hole in a brick wall SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse Time: 4-6 hours Cost: $150 Skill Level: Moderate to Difficult Tools List for Patching a Brick Wall: Safety glasses [https://amzn.to/2QhziTi] Angle grinder [https://amzn.to/2HAh0dn] HEPA vacuum [https://amzn.to/2ErI5NS] Hammer [https://amzn.to/30EKJcE] Masonry brush [https://amzn.to/2VKE4tq] Bucket [https://amzn.to/2W0hpi0] Trowel [https://amzn.to/2VVYrsG] Tuck pointer [https://amzn.to/2QlUXtr] Concave jointer [https://amzn.to/2VNbOXo] Shopping List: Replacement bricks Dust mask [https://amzn.to/2X4C5BM] Type N mortar [https://amzn.to/2Et2IJj] Steps: 1. Start by identifying any bricks that have been cut for the hole. Any bricks that are no longer full sized should be removed. 2. To remove the smaller bricks, cut along the mortar lines closest to the brick that’s being removed using an angle grinder. To keep the dust down, use a grinder with a vacuum attachment and connect it to a HEPA vacuum. These tools can be rented from the home center if you don’t have them. 3. Once the mortar lines have been cut, carefully hit the bricks out of place with a hammer. Watch the mortar lines near bricks that aren’t being cut out. If there’s resistance, it’s possible those bricks will end up damaged and will need to get cut out as well. 4. Once the bricks and the mortar have been removed, wipe away any excess dust with a masonry b

Published 2019-05-29 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.

Keep exploring DIY & Crafts