02:52How to Paint Stair Treads | Ask This Old House
From the creator
In this video, with two big dogs in the house, a homeowner needed to protect his stairs while upgrading. Paint expert Mauro Henrique came up with a plan and chose the right products and techniques for the job. SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse. High-traffic areas take a lot of abuse. When it’s a staircase, the traffic is condensed to an even smaller area. When that traffic is caused by two big dogs, the abuse can be intense. When a homeowner grew tired of his dogs gouging and scratching his steps, it was time for an upgrade. Mauro Henrique helped prep and paint the steps and handrails so they could withstand years of traffic. Where to find it? The stair treads and handrails worked on were unfinished wood. The stair treads had a lot of scratches and marks, so Mauro used a 120-grit sandpaper on a power sander [https://homedepot.sjv.io/jeEZoe] connected to a HEPA vacuum [https://homedepot.sjv.io/WyjRmP]. 220 – 320 grit sandpaper [https://homedepot.sjv.io/zxQrWM] was used all over afterwards. The same grit sandpaper was also used on the handrails. N95 masks [https://homedepot.sjv.io/jeVnRe] and safety glasses [https://homedepot.sjv.io/RGxmzg] were worn while sanding. And before every coat of primer and paint, the area should be lightly sanded with 220 to 320 grit sandpaper and vacuumed. Drop cloths [https://homedepot.sjv.io/yqD9a2] were used to protect the floor and stair treads when they were not being worked on. Painter's tape [https://homedepo
Published 2025-02-22 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.





