01:54How to Paint Bare Wood | House One
From the creator
Want to save time and money when painting wood? House One’s Jenn Largesse shares her process for getting the best results when painting bare wood. #ThisOldHouse #AskTOH SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse Have you ever ended up applying too many coats of paints to wood, only to have stains bleed through and ruin your finish? Read Jenn Largesse’s recommended steps for painting bare wood. Steps for Painting Bare Wood Step 1: Sand the Surface It may seem unnecessary to sand bare wood before painting, but stock lumber is often coated in a glaze to help protect it. Removing that coating will help the paint adhere. In addition, sanding opens the grain of the wood, which can also help with adhesion. This Old House Painter Mauro Henrique suggests using 150 grit sandpaper and then vacuuming and wiping the surface clean. Step 2: Seal the Knots I work with a lot of pine and nothing is worse than seeing the stain of a knot bleed through a fresh coat of white paint. No matter how many coats you apply, knots will eventually ruin your finish, so seal them with a primer. I prefer using a spray primer that gives me the benefits of sealing with an oil-based product without the cleanup. The oil-based spray can be a product like Kilz [https://amzn.to/3kj593q], which offers a low-odor spray option, or shellac which is a favorite of Mauro because of how well it seals and how quickly it dries. Step 3: Smooth the Surface Before you reach for a “paint and primer i
Published 2020-11-14 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.





