tubeshowcase●1,673,666 videos♡ My collection 0
← DIY & Crafts

DIY & Crafts06:14

How to Move a Box Spring Up a Narrow Staircase | Ask This Old House

This Old House ↗

From the creator

Ask This Old House general contractor Tom Silva shows how to cut and fold, and then fix, a rigid box spring. (See below for a shopping list, tools, and steps.) SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse Shopping List for How to Move a Box Spring Up a Narrow Staircase: - Large canvas or plastic tarp - 16-inch-long 2x4, used with hammer for pounding flat bent wires. - 2 1/2-inch-long screws - 1x3, to replace metal support bar Tools List for How to Move a Box Spring Up a Narrow Staircase: - Slotted screwdriver, to pry up staples - Handsaw, for cutting the wood frame of the box spring - Bungee cord, to hold closed the folded box spring - Hammer, for straightening bent wires - Cordless drill with 5/32-inch-diameter drill bit, to bore pilot holes - Cordless impact driver, for driving screws - Staple gun, to reattach fabric Steps for How to Move a Box Spring Up a Narrow Staircase: 1. Lay a large tarp on the driveway, then place the box spring facedown on the tarp. 2. Use a narrow slotted screwdriver to pry up the staples that secure the fabric to the bottom of the box spring. Peel back the fabric to expose the wood frame. 3. Pry up and remove the metal support bar. 4. Fold down the fabric on each of the long sides of the box spring.[ 5. Use a handsaw to cut through the 1x3 wood strapping on each side. 6. Fold the box spring in half, then secure it with a long bungee cord. 7. Carry the folded box spring up the stairs and into the bedroom. 8. Unhook the bunge

Published 2016-07-29 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.

Keep exploring DIY & Crafts