01:54How to Make Multi-Colored Custom Crayons | I Like To Make Stuff
From the creator
Come see what we made using some old, broken crayons! For $50 off select Casper mattresses, go to http://www.casper.com/iltms and use promo code: iltms *terms & conditions apply. STUFF WE USED IN THIS PROJECT (affiliate links): https://kit.co/iliketomakestuff/custom-crayons https://kit.co/iliketomakestuff/digital-fabrication-tools-3d-printing-laser-cnc https://kit.co/iliketomakestuff/shop-safety-gear MUSIC: http://share.epidemicsound.com/iltms Not many people know that I worked as a candle maker back in college. I've always wanted to make a project around melting wax. and like many parents, we have a bucket of broken crayons. I wanted to use 3d printing and mold making to create a multi-colored custom crayon. I knew early on that I wanted to combine several wax colors to make a fun design. Looking through some cool 8-bit options, I landed on the 1-Up mushroom from Mario. The design was simple enough to replicate but complex that I had to think through the order of operations. To get a liquid wax to conform to a know shape, we're going to have to make a mold, a few actually. I began by creating a mold that broke the 8-bit segments into similar colors. Using Fusion 360, I sketched over a picture of the mushroom and extruded it upward to give a 3d-printable mold for each squared section. After the prints were finished, I could group the little pieces by their intended color and place them in a plastic container. Because the 3d-printed pieces wouldn't allow me to pop the s
Published 2019-02-28 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.





