09:49How to Make Barn Doors // Woodworking & Metalworking | I Like To Make Stuff
From the creator
The barn on our new farm needed some new doors, so we made some out of steel and cedar. Want to see how we made these actual barn doors, come check it out! WE BOUGHT A FARM! : https://www.youtube.com/watch?v=mQTlf6sbprE JIMMY DIRESTA'S BARN DOORS: https://www.youtube.com/watch?v=W7NsrWBV6yU TOOLS & SUPPLIES WE USED (affiliate links): https://kit.co/iliketomakestuff/my-metalworking-tools https://kit.co/iliketomakestuff/my-woodworking-tools https://kit.co/iliketomakestuff/shop-safety-gear MUSIC: http://share.epidemicsound.com/iltms If you don't know, we recently bought a farm, and on the farm there is a barn (sounds like a kid's song). The barn has one large sliding door for the main building, but there is a side room that is supposed to have doors as well. The previous owner took the doors out and replaced them with a cheap wall. Well, that wall is rotted and gross and I want to be able to open up that space. Time to make some barn doors! I cut the nails holding in the patch wall and smashed the rotting structure out. This exposed the previous door jams and the area i needed to measure for the new doors. Armed with these measurements, it was time to cut some steel for the new frames! Now that I had the measurements I needed to begin the door construction, I started cutting the 90-degree steel beams. I used the metal-cutting bandsaw set to 45-degree angles to cut all eight pieces that will make up both door frames. Using the MIG welder, I welded the pieces together making
Published 2019-08-29 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.





