01:39How to make a Transformers Bluetooth BoomBox | I Like To Make Stuff
From the creator
I made a Bluetooth Boombox that looks like Soundwave!! Click http://www.dashlane.com/make and use my promo code ‘make’ to get 10% off your Dashlane Premium subscription! TOOLS & SUPPLIES (affiliate links): https://kit.co/iliketomakestuff/soundwave-bluetooth-boombox https://kit.co/iliketomakestuff/my-woodworking-tools https://kit.co/iliketomakestuff/digital-fabrication-tools-3d-printing-laser-cnc https://kit.co/iliketomakestuff/shop-safety-gear MUSIC: http://share.epidemicsound.com/iltms I began the project by designing the most iconic element of the boombox, the Soundwave face. I traced a picture of the 80's toy in Fusion 360 so that I could export those cut lines out to the CNC. You don't have to do this step if you don't have access to the CNC, you can very easily cut these panel details out of thin EVA foam or strips of thin wood. I loaded the cut paths into Aspire, my CNC design software, and carved the the lines into a piece of 1/2" MDF. Again, whether you are making a crazy Transformers prop or another interesting boombox, you can add these details in a lot of ways. The boombox's overall size was determined by the size of two speakers side-by-side. They would be mounted to a panel that is fit inside the finished boombox. I cut the top, bottom, and side panels on the table saw and attached them together with glue and brad nails. I also cut a back panel to complete the enclosure and attached it with some screws so I can access the speaker if needed. In the original
Published 2018-09-20 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.





