How to Make A Tool Organizer | I Like To Make Stuff

From the creator

I found it difficult to keep project-specific tools and parts organized, so we made a tool organizer that can store everything! Now you can bring everything you need with you in one place. If you're interested in making one for yourself, check out the plans below. DIGITAL PLANS LIBRARY: These Plans: https://iliketomakestuff.com/shop/product/tool-organizer-digital-plans/ TOOLS & SUPPLIES WE USED(affiliate links): https://kit.co/iliketomakestuff/my-woodworking-tools Center Finder - https://www.amazon.com/dp/B07HVP9P8J?tag=ilik-20 https://kit.co/iliketomakestuff/shop-safety-gear MUSIC: http://share.epidemicsound.com/iltms This entire project can be made from 2 8-foot long 1x6s, so breaking down the materials is pretty easy. First, we broke down the side walls and divider elements for the two boxes. I chose to make the sides overlap in a single joint, so each side wall will be the same length. While the sides are the same length, the lower tray differs from the upper box in that the lower walls are half as tall. This way, you can rip the 1x6 in half and get two walls. The overlapping joints were cut on the bandsaw (you could use a jigsaw also) in a way that the tongue and the recess are inverted so that each piece could fit regardless of orientation. Make sure to cut a dado in the upper box side walls to receive the dividers. The dividers are a little wider than the box walls because they fit inside the dado channels. These pieces also were ripped down by 1/2" (1.27 cm) bec

Published 2020-01-16 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.