18:08How to Make a Sandpaper Organizer | I Like To Make Stuff
From the creator
We decided to take all of my loose sandpaper and put it into one place. This week we're making a Sandpaper Organizer for the shop! GET PLANS FOR THIS PROJECT!: https://iliketomakestuff.com/product/sandpaper-organizer-digital-plans/ TOOLS & SUPPLIES (affiliate links): https://kit.co/iliketomakestuff/my-woodworking-tools https://kit.co/iliketomakestuff/shop-safety-gear MUSIC: http://share.epidemicsound.com/iltms I don't know about you, but I have a lot of sandpaper and it doesn't have a good home. I have sheets of sandpaper in drawers, discs in a box, and sponges falling off shelves. It's about time I get all of those pieces together in one sandpaper organizer. Because this storage unit would be relatively small and have many points of internal connection, we decided to use 1/4" MDF. We wanted to keep this project as small as we could so that it could fit on small project panels you could get at your local home center. It ended up being a little bit bigger than a 2'x4' sheet. I followed the cut list and had all of the think pieces ready to go. The organizer would have an open box on the top for sanding discs, two taller columns on either side for sanding sponges, and a set of shallow shelves for sand paper sheets. To connect everything together, I decided to cut dados in the thin material and use wood glue with little dabs of CA glue to quickly hold the elements together while the wood glue dried. Once I had all the pieces in place, I let the wood glue dry for a few hours.
Published 2019-06-06 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.





