01:39How to make a Map Cabinet // Woodworking | I Like To Make Stuff
From the creator
I made an awesome map cabinet for my family's photography studio! MAP CABINET PLANS www.iliketomakestuff.com/product/map-cabinet-digital-plans/ TOOLS & SUPPLIES (affiliate links): https://kit.co/iliketomakestuff/map-cabinet https://kit.co/iliketomakestuff/shop-safety-gear My brother and sister-in-law own a photography studio and they print all of their portraits in house. I was asked to make a cabinet to hold the prints that are ready for pick-up. We decided on a traditional-looking map cabinet, but have more shelves than drawers. Here's how to make a map cabinet. I created a Fusion 360 model of the map cabinet so that my brother and sister-in-law could approve the design. The model provided dimensions to cut and assemble the map cabinet case. I built the side supports by cutting down a 1x4 pine board and assembling the rectangular side frames using my pocket hole jig. Then I used my router and a rabbeting bit to create a slot for the thinner plywood side panel. These side frames were attached to the plywood bottom, again, using pocket screws. The plywood top extends out over the front and sides but not the back. This cabinet will sit against the wall, so a decorative overhang on that side of the map cabinet was unnecessary. The top was also attached to the sides and the case to the 1x4 base with,you guessed it, pocket holes. My brother and sister-in-law had a paint color already in mind to match their studio, so painting was pretty simple. Josh and I used some small rol
Published 2018-03-08 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.





