01:54How to Make a Hypertufa Table | This Old House
From the creator
Senior technical editor Mark Powers builds a hypertufa table. (See below for a shopping list and tools.) SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse If you've never heard of hypertufa, let us explain why this concrete look-alike is the perfect material for an outdoor table. Made from a mix of cement, peat moss, and perlite, hypertufa has much of concrete's strength and durability, but it weighs a lot less, doesn't require sealing, and has a more textured, organic appearance. Senior technical editor Mark Powers cast a tabletop with a recess for adding easy-care sedum and designed a notched cedar base that can be taken apart and stored flat. Hypertufa requires a few weeks to cure, so get started now and you'll be able to show off your handsome new table before summer draws to a close. Cost: About $65 Time: 8 hours plus curing time for the tabletop Difficulty: Easy. Even a novice can cast the tabletop and build the notched base Shopping List for How to Make a Hypertufa Table: - 1x4 scrap lumber, for the form - cedar 1x4s, for crosspieces and stretchers - cedar 1x2s, for legs and support blocks - 1 1/4-inch and 2-inch deck screws - perlite. Get two bags - peat moss. Get one large bag - portland cement. Get a 47-pound bag - acrylic fortifier, for the hypertufa mix, to prevent cracking - 3/4-inch rigid-foam insulation - petroleum jelly or cooking spray, to coat the interior of the form - 1/4-inch hardware cloth - plastic sheeting, to cover the form while t
Published 2015-01-19 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.





