01:54How to Make a Custom Shadow Box | I Like To Make Stuff
From the creator
Come see how I made this shadow box to display our Lego collection! Thanks for Skillshare for sponsoring this video, the 1st 500 people to use the link below get 2 months free! https://skl.sh/makestuff2 GET THE DIGITAL PLANS: https://www.iliketomakestuff.com/product/shadow-box-digital-plans/ TOOLS & SUPPLIES (affiliate links): https://kit.co/iliketomakestuff/shadow-box https://kit.co/iliketomakestuff/my-woodworking-tools https://kit.co/iliketomakestuff/shop-safety-gear MUSIC: http://share.epidemicsound.com/iltms This project began with one of the Lego Brickheadz figures. I wanted each individual space to hold a figure, so I measured one with a lot of extra pieces. Adding a 1/2" buffer on all sides gave the toys a comfortable space to sit inside. I took those measurements and scaled the shadow box to fit our favorite figures. For this project, I used some left over 1/2" plywood. I began by ripping the pieces that would nest together to become the support shelves. This rectangular box was made up of 4 vertical slats and 2 horizontal ones. To get those pieces to snuggly fit together, I used my dado stack on the table saw. I made some test cuts to dial in the settings so that the boards would be cut half-way through. This way, the two boards would sit perfectly flush together when combined. I taped all of the vertical pieces together and cut them at the same time. The same method was used for the 2 horizontal boards as well. Now that I had a hashtag-looking shelf, I wanted
Published 2019-01-10 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.





