18:08How to Make a Custom Roof Rack | I Like To Make Stuff
From the creator
I've always wanted a roof rack for my Land Cruiser, but the commercially available options didn't fit my needs, so I made a custom one, come see how! TOOLS & SUPPLIES (affiliate links): https://kit.co/iliketomakestuff/roof-rack https://kit.co/iliketomakestuff/shop-safety-gear https://8020.net I ordered pieces of aluminum extrusion from a company called 80/20. After selecting 40mm & 80mm T-slotted pieces, I was able to provide specific dimensions that the company cut to size. The rack was designed to hold 2 full sheets of 3/4" plywood, so my initial drawing called for 80mm high rails in the front and along the sides with 40mm horizontal runners. This height difference allows the plywood to slide on top of the shorter runners and still hit the taller outsides that act as hard-stops. With the rails, I purchased some 90-degree connectors to secure the different components together. The rack itself was essentially done, but I had to have a way to mount it to the roof. All vehicles are different, but my Toyota Land Cruiser has a metal rain gutter that runs along the sides of the roof. There are commercially available mounts that support the rack from this gutter, but we're going to make our own. As I mentioned, you could buy a set of roof-rack mounts that attach to the rain gutters. Because I have a capable metal-working shop, I can design, prototype, and build my own set of brackets out of really inexpensive steel flat stock. After a trip to my local metal yard, I cut the flat
Published 2018-08-16 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.





