tubeshowcase●1,672,522 videos♡ My collection 0
← DIY & Crafts

DIY & Crafts12:51

How to Make a Catapult (2 MILLION SUBSCRIBERS!) | I Like To Make Stuff

I Like To Make Stuff ↗

From the creator

I would like to thank everyone of you for subscribing to my channel and making I Like to Make Stuff a reality. To commemorate the event, we made a quick and easy catapult! TOOLS & SUPPLIES (affiliate links): https://kit.co/iliketomakestuff/catapult https://kit.co/iliketomakestuff/my-woodworking-tools https://kit.co/iliketomakestuff/shop-safety-gear MUSIC: http://share.epidemicsound.com/iltms A catapult is an ancient weapon made by placing a projectile into an arm and pulling that arm under tension. Once the tension is released, the arm swings forward, launching the projectile at thine enemies! In this case, our projectiles are dodgeballs and old fruit from my refrigerator. I'm using 2x4s for the catapult frame. The frame is made of two side walls connected at the bottom with stringers. The side walls are made of an 8 foot 2x4 at the base, and a shorter 2x4 attached in the middle as an upright. Because there would be a lot of toque applied to this upright, I use the remainder of that piece as a 45 degree cross brace. You could use pocket holes for this project, but I wanted to build it fast and dirty, so I used construction ties. These are used in home building and simply connect the two board together with the external plate. I originally thought there should be a horizontal stop that the arm would hit, thus multiplying the arm's fling-ability, but it was completely unnecessary and actually worked against the design. With both side walls connected by the lower stringers

Published 2018-09-06 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.

Keep exploring DIY & Crafts