01:39How to Make a 3d Printed Epoxy Rolling Pin | I Like To Make Stuff
From the creator
I have been curious if you could 3d print a cool shape inside of its own resin mold. Come see how it turned out! TOOLS & SUPPLIES (affiliate links): https://kit.co/iliketomakestuff/3d-printed-epoxy-rolling-pin https://kit.co/iliketomakestuff/shop-safety-gear MUSIC: http://share.epidemicsound.com/iltms After making the silicone mold for the epoxy neon sign, I wondered if I could make a cool 3d printed design inside of its own mold? I was thinking about making a rolling pin out of resin with something cool inside, come see if it worked! This project began with the idea of repurposing some of the waste that comes from 3d printing. Failed prints, support material, and crazy spaghetti could be submerged in resin and turned into a cylinder. That idea morphed into a cylinder that could highlight the cool geometric patterns of the infill supporting a print. So we printed a tower that was made entirely of triangular infill with out a top. I filled this up with epoxy using the print's walls as the mold. Well...this failed...in a few ways. First, 3d prints are not totally water tight, so a lot of the epoxy seeped out and got all over my work table. Secondly, the piece that did harden didn't really look that great when we turned it on the lathe. The infill pattern was made of vertical structures that you couldn't really see from the outside. So, Josh designed a really cool triple spiral shape that could print inside of a cylinder with a bottom and no top. This shape would corkscrew
Published 2018-11-08 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.





