01:39How to Install Three-Piece Crown Molding | This Old House
From the creator
This Old House senior technical editor, Mark Powers shows how to install 3-piece crown molding. (See below for a shopping list and tools.) SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse A common decorative flourish for traditional homes, crown molding enriches a space by forming an eye-catching transition between the walls and ceiling. But if your ceilings are high or your room has generous moldings around windows and doorways, a single strip of crown molding might get lost overhead. To get the right effect, you could opt to use a large-profile molding, says This Old House senior technical editor Mark Powers. "But you'll pay a hefty price for large profiles," he says. To lower the cost without sacrificing aesthetics, Mark came up with a way to install a simple L-shaped half beam first, then attach crown moldings to the fascia and soffit for a handsome, built-up appearance. Recruit a buddy to help you make cuts and lift the bulky pieces into place, and in just a couple of days, you'll have pulled off a room transformation that will draw all eyes upward. Shopping List for How to Install Three-Piece Crown Molding: - Primed crown molding. Select a larger profile for the upper run and a smaller one for the lower run. To calculate how much to buy, round the length of each wall to the nearest foot and add the lengths together. - Primed fascia board, with a decorative profile on one edge. - Primed 1x6 soffit board - 2x2, for cleats on the walls and ceiling, to w
Published 2015-01-03 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.





