35:15How to Install Thermostatic Radiator Valves | This Old House
From the creator
This Old House plumbing and heating expert Richard Trethewey enhances the performance of an old radiator with a new thermostatic valve. (See below for a shopping list and tools.) SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse What Does a Thermostatic Radiator Valve Do? Thermostatic radiator valves control the heat output from a single radiator for better energy efficiency. In doing so, you also create mini-zones in your heating system. Cost: $50 to $100 Time: 60 to 90 minutes Skill level: Moderate. Requires basic plumbing skills and the strength to bust loose old threaded fittings Shopping List for How to Install Thermostatic Radiator Valves: - thermostatic radiator valve - pipe sealant (dope), seals threaded fittings - single-strand wicking, improves water-tight seal on threaded fittings - canvas drop cloth, used to protect floor Tools for How to Install Thermostatic Radiator Valves: - two pipe wrenches, used to loosen and tighten threaded fittings - spud wrench, used to loosen and tighten spud - drill/driver, for drilling holes and driving screws - 3/8-inch-diameter twist drill bit, for drilling hole in side of metal radiator cover Thermostatic Valve Installation in 13 Steps Drain water from radiator. Use pipe wrenches to disconnect old valve from radiator. Remove spud using a spud wrench and pipe wrench. Apply thread sealant to new spud, then wrap single-strand wicking around the spud threads. Use a spud wrench and pipe wrench
Published 2014-11-22 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.





